Applications Library > Handling for stamping and forging

The robot arm loads the press with sometimes hot rawlings.
After the pressing procedure, the formed parts are removed from the press and palletized. Read more ...

Application of a mechanical transfer system on a dual slide press for the production of automobile parts. Increasing the production performance by 50% to 12 strokes per minute in continuous mode operation at a travel in operating direction of 2700 mm. The overall length of the transfer unit is 17700 mm Read more ...

Automation of a press tandem line consisting of 4 single presses for the manufacture of large surface automobile parts with a max. blank size of 4300mm x 2000mm. Direct transfer of parts from press to press with a distance of 7,2m without intermediate storage. Press line in permanent stroke mode (without stop at TDC) with up to 12 strokes per minute. Read more ...

Automate the de-stacking, loading, unloading, and restacking of Frame Rails through bend, pierce, and form operations.
(4) Operators were manually running production on a 91 kg 5.3 meter frame rail. This part had to be run three times through a press to get the bend, pierce and form operation. Each batch had to be de-stacked, loaded/unloaded through a press and restacked or loaded into a rack. Read more ...

Major automotive tier 1 supplier located in Melbourne/Australia was awarded to supply structural stampings and welded assemblies for Toyota in Australia. The parts for both of these tasks will processed and stamped by a 1500 Ton 6,100 x 2,400 transfer press. Read more ...

Major HVAC (air conditioning) supplier located in Texas U.S.A. manufactures 4 different part sizes of air conditioner tops within a 1500 Ton 6100 x 2400 transfer press. Read more ...