Applications Library > Machine and system builder

In high-voltage applications welded aluminium pipes are used for gas insulated switchgear. In pressure resistant piping systems high currents are being switched under SF6 (sulphur hexafluoride) inert gas.
To prevent electric breakdown, the junctions of the gas-filled piping have to be smooth. Such a pipe consists of a cylindrical centre section with cast aluminium flanges welded on on both sides. To meet the requirements, the weldseams between centre section and flanges have to be flattened.
The workpieces range from 200 to 500mm in diameter and measure up to 7000mm in length. Read more ...

Loading and unloading a cold-rolling machine. Integrated mechanical module. Read more ...

Gleason-Pfauter gear hobbler for gear-cutting of shaft- and wheel-shaped workpieces with all the profiles and shapes that occur regularly on the circumference of cylindrical workpieces. Feeding of all parts with a horizontal axis and two vertical axes with parallel gripper. Deposit of workpieces on an indexing chain belt integrated in the machine. Read more ...

Loading and unloading workpieces and also the diamond dressing gearwheels of a honing machine in the automotive industry.
The workpieces weigh 5 kg and have a diameter of up to 250 mm. The workpieces arrive lying on a circulating belt and must be loaded into the machine standing up.
The workpieces are loaded onto a hydraulic expansion chuck and the loading must, therefore, be very precise. Read more ...